working width
5′ 9″-41′
transport width
6′ 9″-19′ 4″
blade diameter
22″ or 24″
blade spacing
10″
Features
HIGH-SPEED DISK FAMILY
Tackle Primary and Secondary Tillage With One Tool
Case IH Speed-Tiller 465/475 are high-speed tillage tools that dig like a disk and finish like a finisher — maximizing the agronomic quality of the seedbed from surface to floor, fall or spring. Featuring indexed, independently mounted blades, these high-speed disks are available in either rigid mounted or trailing configurations to meet the unique demands of each operation.
Competitive Advantage
Every Detail Counts
There are countless features that set the Speed-Tiller apart from the rest. When it comes to agronomic performance and promoting higher yields, every detail counts. Here are just a few reasons why the Speed-Tiller beats the competition every time:
Agronomic Performance
- Field-tested and proven as the only high-speed disk on the market worthy of the Case IH Agronomic Design™ badge.
- Works the entire soil profile — and doesn’t create compacted valleys and humps below the surface of your fields like competitive units.
- Designed to promote healthier soil and consistent, accurate seed placement.
Disk Arms & Gang Design
- Disk arms are the heaviest and strongest on the market — nearly double the thickness of competitive units.
- Double-taper roller bearings — one for each disk blade — feature a 7-lip seal for extreme ruggedness and extended service life.
- Tapered bearings have the ability to handle both extreme radial loads and thrust loads, while standard roller bearings are only built to deal with radial loads.
Rugged Frame
- It’s easy to see how much stronger and rugged the Speed-Tiller is built when comparing to the competition side by side.
- A thicker and heavier frame helps increase durability.
- Angled pieces in the frame design provide maximum strength.
Torsion System
- 2-inch-thick, heavy-duty rubber torsions for disk arm mounts allow blades to hold their position through tough conditions and a range of speeds.
- Smaller rubber torsions on competitive units mean less breakout force, improper disk spacing and increased wear.
- Paired with the durable and heavy disk arms, the torsion system gives the disks superior soil penetration — while still being malleable enough to allow each disk to have 8 inches of vertical travel.
Cost of Ownership
- The durability of the Speed-Tiller contributes to a lower cost per acre compared to competitors.
- From the heavy-duty hub and bearing assembly, to durable Earth Metal blades, the Speed-Tiller is built to last — even in tough conditions.
Leveling & Depth Control
A True Dual-Season Tool
The Speed-Tiller digs like a disk and finishes like a finisher for flexibility no matter the season. In fall, run deeper — from 3 to 6 inches — to manage crop residue, control weeds and destroy root balls. In spring, run at shallower depths to create an ideal seedbed finish.
Depth Control
- Exclusive constant-level hitch delivers deep penetration, consistent disk depth and residue management
- Puts usable weight on the blades to run deeper or transitions to roller wheel to optimize tool finish
- Wing down pressure provides consistent penetration and disk depth across the entire width to assure a high-efficiency seedbed
Leveling
Three conditioner attachment options provide the finish that fits each field:- 16.5- and 19-inch diameter with 1.2-inch rifled round bar Crumbler roller
- 22-inch-diameter heavy-duty steel spring conditioner
- 21-inch-diameter rubber roller with mud scrapers
Independent Blades
Designed to Work Your Entire Soil Profile
- Laterally adjustable, indexed, independently mounted blades eliminate compacted valleys and humps where blades run below the soil surface
- Ability to move more soil than traditional high-speed compact disks
- Unique blade position and design reduces plugging in wet soil conditions with high volumes of trash
- Rubber-torsioned disk arms, paired with the powerful leveling roller, effectively incorporate stubble into the soil
Operating Speed
Productivity at Your Speed
The Speed-Tiller high-speed disk is designed for superior agronomic performance at your speed, in your conditions. Reach high speeds with more robust disk mounts, arms and bearings, and a rugged frame built to withstand some of the world’s harshest soil conditions.
- 1.25-inch-(32 mm) thick disk arms are the heaviest and strongest on the market, and nearly double the thickness of competitive units
- 5-bolt heavy duty disk bearings and hubs use unitized double taper roller bearings and a 7-lip cartridge seal for superior ruggedness and reliability
- Heavy-duty disk arm mount rubber torsions provide the needed down pressure to penetrate the hardest conditions with the needed protection in rocky soil conditions
- Hydraulically positioned conditioner roller allows the operator to lift the conditioner roller in muddy conditions
Design
Boost Seedbed Quality From Floor to Surface
Agronomic performance sets the Speed-Tiller 465/475 high-speed disks apart from the rest. All Case IH tillage tool designs are tested and proven to maintain or improve the agronomic performance of your fields. While competitive units till fields to look smooth on the surface, the Case IH Speed-Tiller is the only high-speed disk on the market that creates a smoother, more level seedbed floor and a finish that fits your fields.
- Smooth seedbed floor contributes to consistent, accurate seed placement and uninhibited root development
- Unmatched agronomic performance maximizes weed control and water penetration for healthier soil
Quick Specs
- Frame Style: Rigid Mount
- Operating Width: 5.7 ft - 18 ft.
- Transport Width: 6.9 ft - 19.4 ft
-
Bancroft Implement, Inc.
312 West Ramsey St.
Bancroft, IA 50517
515.885.2319
Get Directions -
Corwith Red Power
301 1st Street
Corwith, IA 50430
515.583.2364
Get Directions -
Estherville Red Power
2703 Murray Rd.
Estherville, IA 51334
712.362.3596
Get Directions -
McRoberts Red Power
3080 Hwy 14
Greene, IA 50636
641.823.4154
Get Directions -
Humboldt Red Power
2050 13th Street North
Humboldt, IA 50548
515.332.1702
Get Directions -
Mason City Red Power
10997 265th St
Mason City, IA 50401
641.424.2702
Get Directions -
Manson Red Power
221 Eighth Street
Manson, IA 50563
712.469.2145
Get Directions -
New Hampton Red Power
2205 240th Street
New Hampton, IA 50659
641.394.3178
Get Directions -
Spencer Red Power
3695 Hwy 71
Spencer, IA 51301
712.262.2933
Get Directions -
West Bend Red Power
101 - 130th St
West Bend, IA 50597
515.887.7781
Get Directions
Red Power Team © 2023 Site by R.A | EquipmentLocator.com