PTO Required
180 HP
Windrow Pickup
92 in. (2.3m)
Cornhead
3-row 28-32 in.
Crop Processor
Optional

Features
Convert Crop Into High-quality Feed
The FHX300 has a wide, 25.5 in (647.7 mm) throat opening to swallow even the heaviest crops. The feedrolls move material smoothly and evenly into the cutterhead. Rugged, 21 in (533 mm)-diameter cutterhead
- 12 hardened-alloy knives chop evenly and efficiently
- Knives span the full width of the cutterhead
- Provides uniform length of cut, converting crop into high-quality feed
Powerful Blower Moves Quickly
A powerful 1,000-rpm blower moves crops quickly to fill wagons and trucks fast. Works efficiently regardless of whether you’re working in wet, heavy hay or an easy-to-blow crop like corn.
Remote Control the Spout
Electronic remote controls allow you to rotate the spout 90 degrees. The spout is easily repositioned to fill towed forage wagons or trucks to the left. From your tractor seat, you control:
- FHX300 feedroll direction either forward or reverse
- Basic pick up functions
- The standard hydraulic tongue swing from road to field position
Cut Lengths from 3/16 in to 1 5/16 in
The FHX300 allows for precise cut-length adjustment . Control length of cut by:
- Changing feedroll speed
- Adding or removing knives
- Using one of five optional recutter screens
Stop Feedrolls Before Metal Can Damage the Cutterhead
How it works:
Detector stops feedrolls within a fraction of a second — before metal can damage the cutterhead.
Detector stops feedrolls within a fraction of a second — before metal can damage the cutterhead.
- The sensor and electromagnet in the front lower feedroll emits a constant magnetic field between the two stainless-steel lower feedrolls.
- A light and horn alert you when metal is detected, and a signal is sent to the solenoid to stop the feedrolls.
- Power is shut off to an electric clutch on the reversing gearbox that shifts to neutral and stops the power to the feedroll drive.
- The feedroll control switch allows you to back the material out of the feedrolls.
- After metal is removed, the detector resets automatically.
Maximize Feed Quality
The optional crop processor maximizes feed quality in corn silage, saving time and cost by chopping and processing in one operation. By removing the material baffle and the processor drive belt, you can chop haylage.
Crop coming from the cutterhead is propelled between two 8 in (203-mm)-diameter fluted rolls. The top roll turns 15 percent faster than the bottom roll , providing the scuffing action necessary to crack kernels and break cob pieces . This results in:
Crop coming from the cutterhead is propelled between two 8 in (203-mm)-diameter fluted rolls. The top roll turns 15 percent faster than the bottom roll , providing the scuffing action necessary to crack kernels and break cob pieces . This results in:
- Better fermentation
- More effective fiber in the ration
- Feed that’s easier for livestock to digest
Heavy-duty Gauge Wheels and a Floating Auger
Built compact for easy maneuvering in hilly terrain and smaller fields:
- Ground-hugging HDX20P windrow pickups gather the entire crop.
- Heavy-duty gauge wheels handle rough ground
- Wheels help the pickup rise over swells and into dips without gouging
- Open end pulls in wide windblown windrows
- Measuring 92 in. (2.3 m) tine-to-tine, the HDX20P has the capacity to handle large windrows
- Closely spaced pickup tines flex to gather the entire windrow
- Floating auger handles heavy crop conditions
- Retractable finger feed auger feeds crop smoothly
- Auger reverses with feedrolls to easily clear plugs in case of overload
The HDX3R Grabs Every Stalk
- Points float over ground contours
- Skid shoes are adjustable to eliminate bulldozing
- Gathers cornstalks planted on 28 to 32 in (711 to 813 mm) row spacing
- Gathering chains reach forward to grasp cornstalks and feed smoothly into feedrolls
- Cutting discs shear corn close to the ground
- Discs are spring loaded
- Allows discs to move out of the way when an obstacle is encountered
- Right- and left-hand power dividers ensure heavy crop flows into feedrolls
Quick Specs
Windrow Pickups: 28 and 32 in (1.9 and 2.3 ft)
Cutterhead: 12-Knife
PTO Required: 180 hp (134.2 kw)
-
Bancroft Implement, Inc.
312 West Ramsey St.
Bancroft, IA 50517
515.885.2319
Get Directions -
Corwith Red Power
301 1st Street
Corwith, IA 50430
515.583.2364
Get Directions -
Estherville Red Power
2703 Murray Rd.
Estherville, IA 51334
712.362.3596
Get Directions -
McRoberts Red Power
3080 Hwy 14
Greene, IA 50636
641.823.4154
Get Directions -
Humboldt Red Power
2050 13th Street North
Humboldt, IA 50548
515.332.1702
Get Directions -
Mason City Red Power
10997 265th St
Mason City, IA 50401
641.424.2702
Get Directions -
Manson Red Power
221 Eighth Street
Manson, IA 50563
712.469.2145
Get Directions -
New Hampton Red Power
2205 240th Street
New Hampton, IA 50659
641.394.3178
Get Directions -
Spencer Red Power
3695 Hwy 71
Spencer, IA 51301
712.262.2933
Get Directions -
West Bend Red Power
101 - 130th St
West Bend, IA 50597
515.887.7781
Get Directions
Red Power Team © 2023 Site by R.A | EquipmentLocator.com