Salford Group Valmar 8700 Pull-Type Fertilizer Spreader » Red Power Team, Iowa

Salford Group Valmar 8700 Pull-Type Fertilizer Spreader

Salford Group Valmar 8700 Pull-Type Fertilizer Spreader for sale at Red Power Team, Iowa

Double tap to zoom

Salford Group Valmar 8700 Pull-Type Fertilizer Spreader for sale at Red Power Team, Iowa



Cover More Acres in Less Time

Designed to meet the needs of large-scale farm businesses, the Salford Valmar Airflo 8700 is a high-capacity, pull-type spreader that delivers the highest rates of application currently available in a commercial spreader. Thanks to its advanced design, the Airflo 8700 delivers rates as high as 1,000 pounds per acre at 8 miles per hour, allowing you to finish large jobs faster than ever. 

Accurate Metering System

The Airflo 8700 precise rate is a result of the single motor drive hydraulic metering kit that automatically adjusts on the go to ensure a uniform application rate regardless of speed. The hydraulically engaged metering system is based on a 30-setting, oil bath gearbox combined with a two-speed gear ratio to allow 60 settings that can be adjusted in increments of seven percent. This enables operators to select from more settings at closer increments, a feature that translates into more control over application rate for substantial savings in fertilizer costs. The 8700 is quipped with a hydraulic drive metering system for those using variable rate technology.

Spread More Product between Fills

The 8700’s extra-large, 230-cubic-foot hopper can carry up to seven tons of product (8708) or 357-cubic foot hopper carrying 11 tons of product (8711). The hopper itself is constructed of corrosion-resistant, painted 409 stainless steel and comes with a roll tarp installed.

Ideal for Row Crop Farming

Originally designed to meet the needs of row crop farmers, the 8700 features axles which can be adjusted from 72 inches to 120 inches to accommodate most row spacings. In addition, the 8700 can be equipped with optional tire sizes to achieve greater flotation or narrower tracking, depending on the operation.

High Capacity PTO or Hydraulic Driven Fan

This fan has field-proven history on the Air Max. With an operating speed of 4,700 RPM, the fan’s air flow feeds through a nine-inch outlet directly to a two-piece manifold. Important features include a 17-inch fan impeller with plastic impeller blades and a four-band fan belt with tightener. The standard fan drive is a 1,000 RPM, 1 3/8-inch, 21T spline drive shaft. An optional 20T, 1 3/4-inch yoke with bridge is available for those requiring a larger driveline.  Valmar also offers an optional hydraulic driven fan drive. This option requires 35 gallons per minute hydraulic flow operating at 2225 PSI – well within the capability of some of today’s higher capacity tractors.

Durable and Easy to Maintain

The 8700 includes a number of important features that provide for increased durability and easier maintenance. For long life, the hopper and booms are manufactured from stainless steel. There is easy access to all mechanical parts including the manifold. Finally, calibration and emptying of the unit is easier, thanks to funnel trays that are inserted under the metering system for easy collection of material.

Choose Boom Width to Match Your Needs

The Valmar 8700 comes with a standard  60 foot row crop boom or 72 foot spread,  allowing you to match boom width to your crop requirements. Booms are hydraulically folded and feature a hydraulic shut-off on the right boom to allow application on the left side only. All booms are equipped with rubber torsion boom suspension (which do not require any service and reduce friction, bouncing, and wear) and manual folding, break-away tips to minimize damage that may occur from striking obstacles in the field.

Easy to Operate

Designed for easy use, all important field operations on the Valmar 8700 are hydraulically controlled from the cab through the use of three separate hydraulic lines (four lines with optional hydraulic fan drive). For example, the booms are folded, unfolded and locked hydraulically (through the use of a sequencer valve), allowing quick and easy transition to and from transport position. Also, the metering drive wheel is engaged or disengaged hydraulically and comes equipped with a lockout valve to ensure ongoing positive engagement. Finally, half width application is possible thanks to a hydraulically operated half shut-off clutch system that comes equipped with a pressure relief valve for trouble free operation.

Cover crops

Salford's Valmar air boom applicators gently and accurately handle seed, fertilizer and other granular like herbicides. Equipped with 60 ft booms and drop tube kit, the 8700 delivers granular product on 30 inch centers.  Combined with row crop tire options the 8700 has the clearance to direct cover crops between rows of established corn crops.


Hydraulic Requirements:

  • 4 outlets plus additional outlets for hydraulic options
  • 30 gpm @ 2800 psi
  • Case drain for fan required


  • 4 outlets required to operate standard functions

  • Boom fold and lock
  • 30 gpm @ 2800 psi
  • Operate half shut-off on right or left boom
  • Case drain for fan required


  • 72-88 inch adjustable axle
  • Optional 120 inch axle
  • Single axle with 10 bolt hub
  • 8708 - 14.9 inch (380/85) R38
  • 8708 - 28L-26 R3 (750/65) R1
  • 8711 - 800/65 R32 tire
  • 8711 - 380/90 R46
  • Optional Digi-Star scale kit


  • 8708 - 8 ton / 260 cubic foot
  • 8711 - 11 ton / cubic foot
  • 260 cu. ft. (223 cu. ft. and 37 cu. ft., if second metering system is used)
  • 409 stainless steel with two-component epoxy primer and two-component, cross-linked acrylic top coat paint system
  • Roll tarp installed
  • Hopper screen installed
  • Chain tensioner


  • 60-ft row crop or 72-ft spread width
  • Rubber torsion boom suspension
  • 304 stainless steel construction
  • Break-away tips
  • 3-in. diameter tubes (6 per side)
  • 2 deflectors per tube

Primary Metering:

  • (2) 14 inch 304 stainless steel conveyor chains
  • Maximum rates 1000 lbs/acre at 8 mph
  • Hydraulic Drive
  • ISOBUS Section Control Kit*
  • Two motor independent drive left hand/right hand hydraulic main metering.

Second Metering System:

  • (2) 12 inch 28 groove metering rollers
  • Hydraulic Drive
  • Single motor drive hydraulic metering kit with electric clutches for left hand/right hand on/off.


  • 17-in. impeller operates at 4700 RPM
  • 9-in. outlet
  • PTO fan drive
  • 1000 RPM CV 13⁄8 or 13⁄4 in. 21 spline drive-line

Transport Dimensions

  • Transport height: 162 in. with 72 ft booms
  • Transport width: 141 in.
  • Length: 385 in. with 72 ft. booms
  • Total weight: Up to 10,500 lb. empty.
  • Weight varies by model and options.