HayBuster CMF-830 » Red Power Team, Iowa
x
x

Double tap to zoom

HayBuster CMF-830 for sale at Red Power Team, Iowa

 

Features

MIXING CAPACITY
The CMF-830 has a 830 Cu. Ft. mixing capacity with the standard extension.

ADJUSTABLE VERTICAL KNIVES
Adjustable vertical knives for more aggressive cutting.

OBSERVATION WINDOWS
The CMF-830 has observation windows on the right and left sides of the machine.

LARGE 24 INCH BY 42 INCH UNLOADING DOOR
Large 24 inch by 42 inch unloading door for fast even unloading and cleaning.

VERSATILE 36 IN. WIDE CROSS AND UNLOADING CONVEYOR
The CMF-830 is equipped with a 36 inch wide hydraulic chain/slat unloading conveyor featuring:

  • Cross Conveyor only with right or left hand drives.
  • Cross Conveyor with spouts or endgates. Magnets are available for the spouts.
  • Cross Conveyor with hydraulic conveyor extension.


Available in right hand, left hand, or both right and left hand unload. The dual discharge unit can only unload from one side at one time. Spouts and optional magnets are also available.
18-5/8 in. to 47 in. discharge height

88" HEAVY DUTY TWIN AUGERS W/7 KNIVES PER AUGER
Heavy duty 88 inch twin screw augers, with self sharpening serrated knives, driven by 2 HD USA gearboxes that are covered by a two year warranty.

DIGI-STAR 4PT SCALE WITH CHOICE OF OPTIONAL DIGI-STAR MONITORS
A CMF-830 equipped with the standard Digi-Star 4pt. scale and EZ 3500 V monitor. All other Digi-Star monitors and scale heads are available. The Digi-Star system is powered by a standard on-board 12 volt battery. Digi-Star feeding programs are also available.

FREE MOTION CLUTCHES ON DRIVE-LINE
Free motion clutches on drive-line protect the heavy duty gearboxes. Gearboxes come with a two-year warranty. The optional two speed gearbox is used for loaded startups and heavy rations.

4 POINT SCALE
4 point scale for accurate weighing, with reduced scale bounce during loading and feeding.

OSCILLATING HEAVY DUTY AXLES
Oscillating Heavy Duty Axles with 4) 315/80 R 22.5 20 ply rated tires provide even weight distribution on uneven and frozen ground.

HEAVY DUTY FRAME
The CMF-830 is built with a Heavy Duty 6" X 9" X 1/4" steel tube frame for strength and longevity.

OPTIONAL MAGNETS ON CHUTES
Discharge magnets on the discharge chutes removes metal, such as bale wire, from feed, providing the highest quality feed available.

DOGLEG CONVEYOR
Optional Dogleg Conveyor Available.

CV PTO OR OPTIONAL 2-SPEED GEAR BOX
The CMF-830 comes equipped with either a Heavy Duty Constant velocity PTO or an optional 2-Speed Gear box. The two speed gearbox is used for loaded startups and heavy rations.

Specs

WEIGHT 
 Total 17,900 lbs. (8,119.3 kg)
 Tongue Weight 2,100 lbs. (952.5 kg)
   
TRANSPORT DIMENSIONS
 Width 10' 2" (3.1 m)
 Length 24' 6-1/8" (7.47 m)
 Height 10' 8" (3.3 m)
   
WORKING DIMENSIONS
 Loading Height with Extensions 10' 8" (3.3 m)
 Width Between 10'-2" and 12' Depending on Conveyor
   
CHASSIS FEATURES 
 Towing Arrangement Clevis Type Hitch
 Jack Capacity 7,000 lbs. (3,175.1 kg)
 Jack Travel 10 in. (25.4 cm)
 Tires (4) 315/80R22.5 20 ply
 Wheels (4) 22.5 x 9 - 10 hole
 Axle Oscillating
 Bearings Tapered Roller
 Extensions 12" Rubber
   
CAPACITIES
 Mixing capacity 830 cu. ft. (23.5 cu. m)
 Gross Weight Capacity 39,400 lbs. (17,871.5 kg)
 Tare Weight - TMR 21,500 lbs. (9,752.24 kg)
   
AUGERS
 Number 2
 Diameter 88 in. (223.52 cm)
 Flighting Thickness 5/8 in. (1.59 cm)
 Number / Thickness Knives 14-1/4 in (.635 cm) self-sharpening
   
DRIVELINE AND GEAR BOXES
 Drive Line 1 ¾" (4.45 cm) Constant velocity 1000 RPM PTO shaft
  Optional two-speed gear box with 1 ¾" 1000 RPM PTO for loaded startups
 Clutch Free motion automatic clutches (2)
 Gearboxes 2- HD gearboxes 
   
UNLOADING CONVEYOR
 Type 36 in. (91.44 cm) Chain With Hydraulic Orbital Motors
 Discharge Height 26 5/8 in. (67.63 cm) to 55 in. (139.7 cm)
 Discharge Options Left, right, both
   
MISCELLANEOUS 
 Door Opening 24 in. (60.96 cm) x 42 in. (106.68 cm)
 Floor Thickness 5/8 in. (1.59 cm)
 Side Wall Thickness 1/4 in. (0.635 cm)
 Scale Digi-Star 4 point scale with optional monitor
 Observation Windows 2
   
REQUIREMENT FOR OPERATION 
 PTO Horsepower Required 150 HP minimum
 PTO Type 1000 RPM, 1 3/4" dia PTO Shaft with 20 splines
 Min. Tractor Hydraulic Output 8 gpm at 1500 psi (30.3 lpm X 10,345 kPa)
 SMV Sign and Road Lights Standard Equipment
 Electrical 12 VDC (battery included)