HayBuster CMF-430 » Red Power Team, Iowa
x
x
HayBuster CMF-430  for sale at Red Power Team, Iowa

Double tap to zoom

HayBuster CMF-430  for sale at Red Power Team, Iowa

 

Features

MIXING CAPACITY
The CMF-430 has a 430 Cu. Ft. mixing capacity with the standard extension.

ADJUSTABLE VERTICAL KNIVES
Adjustable vertical knives for more aggressive cutting.

OBSERVATION LADDER
Ladder mounted on front of machine which allows for viewing of mixed ration while machine is stopped.

CONVEYOR OPTIONS
The unloading door is 42” high and can be on the left or right side of the machine. Conveyor options are a 3’ or 5’ extension which gives a feeding height range of between 36” and 58”. Magnets are available for the conveyor extension.

SINGLE AUGER
88” Heavy-Duty Single Auger with up to 7 self-sharpening serrated knives driven by an HD USA gearbox that is covered by a two-year warranty.

DIGI-STAR FOUR POINT SCALE
The CMF-430 is equipped with a Digi-Star 4 pt. scale and monitor. Various monitor options are available. The Digi-Star system is powered by a standard on-board 12-volt battery. Digi-Star feed rationing programs are also available.

FREE MOTION CLUTCHES ON DRIVELINE
Free motion clutches on drive-line protect the heavy-duty gear boxes. Gear boxes come with a 2-year warranty. The optional 2-speed gear box is used for loaded start-ups and heavy rations.

4 POINT SCALE
4 point scale for accurate weighing, with reduced scale bounce during loading and feeding.

HEAVY DUTY RIGID AXLES
Rigid Heavy Duty Axles on each side with 2 14L-16.1 12 ply tires.

TAPERED BOIL RING
The Tapered Boil Ring is standard equipment on the CMF-430. It prevents product from boiling over the sides during the cutting and mixing processes.

OPTIONAL MAGNETS
Magnets on the discharge chutes remove metal, such as bale wire, from feed providing the highest quality feed available.

CV PTO OR OPTIONAL 2-SPEED GEAR BOX
The CMF-430 comes equipped with either a Heavy Duty Constant Velocity 540 rpm PTO or an optional 2-Speed Gear Box. The 2-Speed Gear Box is used for loaded start-ups and heavy rations.

Specs

WEIGHT 
Total 8,120 lbs (3683.2 kgs)
Tongue Weight 960 lbs (435.4 kgs)
   
TRANSPORT DIMENSIONS  
Width 10 ft. 8 in. (3.25 m)
Length 16 ft. 6 in. (5.03 m)
Height 9 ft. 8 in. (2.95 m)
   
WORKING DIMENSIONS 
Width Between 10'-8" and 14' Depending on Conveyor
Loading Height With Extensions 9 ft. 10 in. (3.0 m)
   
CHASSIS FEATURES 
Towing Arrangement Clevis Type Hitch/Pintle
Jack Capacity 7,000 lbs. (3,175.1 kg)
Jack Travel 10 in. (25.4 cm)
Tires (2) 14L-16.1-12 ply
Wheels (2) 8 hole
Axle Rigid
Bearings Tapered Roller
Extensions 12 inch rubber
   
CAPACITIES 
Mixing Capacity with 12" Extension 436 cu. Ft (12.35 cu. m)
Gross Weight Capacity 19,100 lbs (8,663.6 kg)
Tare Weight - TMR 10,750 lbs (4,876.1 kg)
   
AUGERS 
Number 1
Diameter 88 in. (223.52 cm)
Flighting Thickness 5/8 in. (1.59 cm)
Number / Thickness Knives 7, 5/16 in. (0.3125 in.) Self-Sharpening
   
DRIVELINE AND GEAR BOXES  
Drive Line 1 3/8 in. (3.49 cm)
  Constant Velocity 540 rpm PTO Shaft, Optional 2-Speed Gearbox
Protected Clutch (1) Free motion automatic clutches
Gearboxes (1) HD gearbox with 2 year warranty
   
UNLOADING DOOR  
Door 43 in. (109.22 cm) wide x 36 in. (91.44 cm) long
Discharge Height 30 in. (76.2 cm)
Discharge Options Left or Right
   
MISCELLANEOUS 
Door Opening 24 in. (60.96 cm) x 42 in. (106.68 cm)
Floor Thickness 5/8 in. (1.59 cm)
Side Wall Thickness 1/4 in. (0.635 cm)
Scale Digi-Star 4 point scale with optional monitor
   
REQUIREMENT FOR OPERATION 
PTO Horsepower Required 80 HP Minimum
PTO Type 540 rpm, 1-3/8 in. Dia. With 6 Spline
Min. Tractor Hydraulic Output 8 gpm at 1500 psi (30.3 lpm X 10,345 kPa)
SMV Sign and Road Lights Standard Equipment
Electrical 12 VDC (battery included)