HayBuster 2100 Balebuster » Red Power Team, Iowa
x
x

HayBuster 2100 Balebuster

HayBuster 2100 Balebuster for sale at Red Power Team, Iowa

Double tap to zoom

HayBuster 2100 Balebuster for sale at Red Power Team, Iowa

 

Features

SEMI-MOUNTED

The 2100 Balebuster is semi-mounted, making it easy to maneuver and back into tight places.  This semi-mounted unit transfers approximately 55% of the 2100's operating weight directly to the tractor, keeping the weight off the Balebuster.

HEAVY DUTY LOADER FOR EASY BALE LOADING

The 2100 Balebuster is self-loading, and only requires one person to operate.

SHREDDER CHAMBER

The Shredder Chamber has a 3-chain slatted conveyor that provides the needed traction to handle all round bales, hard or soft core.  The chamber is 15% larger than previous models, reducing spillage and making hay and straw placement much easier.  It processes hay into usable rations, making your hay go farther and reducing your costs.

HEAVY DUTY OFFSET ROTORS, FLAILS WITH REDUCED FLAIR TIP CLEARANCE

The unit's Heavy-Duty Offset Rotor, Flails, and Reduced Flair Tip Clearance combine to throw straw further and process both dry and wet bales.

SPREADS STRAW UP TO 40 FEET

Spreads straw up to 40 feet for excellent erosion control.  Preventing accelerated soil erosion and minimizing sedimentation is a primary concern for farmers, making the 2100 the perfect solution.

WIDE SPREAD CASTER WHEELS

The 2100's heavy-duty caster wheels and very large 9.5 x 14 8-ply tires combine to easily navigate over boggy ground and rough terrain.  additionally, the wide spread caster wheels provide stability and ease of backing.

EASILY ADJUSTABLE DEFLECTOR

The 2100 is equipped with a variable position deflector that is easily adjustable.

Specs

MODEL 2100 Balebuster (Semi-Mounted Round Bale Processor)
WEIGHT  -
Total 3,700 lbs. (1,679 kg)
   
SHIPPING DIMENSIONS  -
Width 8 ft. 5 in. (2.6 m) loader & deflector folded.
Length 12 ft. 9 in. (4.01 m)
Length 8 ft. 5 in. (2.6 m) caster wheels removed.
Height 6 ft. 5 in. (1.96 m) loader folded.
   
TRANSPORT DIMENSIONS  -
Width 10 ft. 8 in. (3.25 m)
Length 12 ft. 9 in. (4.01 m)
Height 6 ft. 5 in. (1.96 m) loader folded
   
WORKING DIMENSIONS (WITH BALE)  -
Width 13 ft. (3.96 m)
Length 12 ft. 9 in. (4.01 m)
Height 9 ft. 8-3/4 in. (3.05 m)
   
CHASSIS FEATURES  -
Hitch Semi-Mounted, attaches to lower Lift Links of Tractor's 3-PT Hitch
Tires (2) 9.5 x 14 -  8-Ply
Wheels (2) 6 x 14 - 5 Bolt Drop Center
 Bearings Tapered Roller 
Axle Caster
   
BALE LOADER -
Type Hydraulic With Mechanical Linkage
Bale Tines (2) Fixed Width
Hydraulic Cylinder (2) 2 ½” x 16” (6.35 cm x 40.64 cm) Double Acting
   
BALE CONVEYOR  -
Type 3 Roller Chains with Bolt-on Cross Slats
Drive Hydraulic Motor with Hydraulic Flow Control
   
BALE SHREDDER CHAMBER  -
Max. Bale Size 6’ long x 6 ½’ Dia. (1.83 m x 1.98 m)
Max. Bale Weight 2,000 lbs (1000 kg)
Rotor Length 78 in. (1.83 m)
Rotor Diameter (Flails extended) 25" (64.77 cm)
Rotor Bearing Ball, 1-3/4 in. (4.44 cm)
Number of Flails 30
Flail Type Heavy Duty Flails, 7/16 in. (11.11 mm) Thick, 3 lbs. (1.36 kg), Heat Treated Spring Steel, Swinging
Number of Stripper Plates 1
Number of Slug Bars 5
Deflector Shield 6 Adjustment Positions through 120° range
Max. Horizontal Spread Straw up to 50 ft.
   
OPERATOR CONTROLS  -
Loader 1 set of Tractor Hydraulic Outlets
Bale Conveyor 1 set of Tractor Hydraulic Outlets
Bale Conveyor Speed Adjustable Hydraulic Flow Control Valve
Slug Bar Shim adjustable
Deflector Shield Position Hand Lever with Position Settings Through 120° range
   
REQUIREMENTS FOR OPERATION TRACTOR  -
PTO Horsepower required 65 to 155
hree Point Hitch CAT II / III
Min. Hitch Lift Capacity 4,000 lbs. (1,818.18 kg)
PTO Type 1000 RPM, 1 3/8” Dia. Shaft With 21 Splines
Min. Hydraulic Output 8 gpm at 1800 psi (46 lpm x 10,345 kPa)
Hydraulic Remote Controls 2 Double-Acting Control Valves with Quick Coupler Outlets
Tractor Weight Must be of equal or greater weight than that of a 2100 BALEBUSTER and 1 Bale
SMV Sign Standard Equipment
Road Lights Standard Equipment