Westfield X10-83 » Red Power Team, Iowa
x
x

Westfield X10-83

Westfield X10-83 for sale at Red Power Team, Iowa

Double tap to zoom

Westfield X10-83 for sale at Red Power Team, Iowa

 

Features

Hopper + Hopper Lift Arm

The low profile hopper features left and right hand flighting to pull grain toward the center of the hopper so it flows efficiently up into the tapered boot – maximizing capacity and minimizing unload time. The 6" rubber extension along the edge of the hopper prevents grain from splashing. The hopper lift arm and hopper can be positioned on the left- or right-hand side of the auger, offering the convenience of unloading from either side.

OPTIONAL FEATURES

Right Angle Drive

When working in a small space, the right angle drive allows the auger to be positioned at a 90-degree angle from the truck.

Reducer-Reverser

Required for 1,000 RPM tractors to reduce the speed to 540 RPM required for an auger.

The reversing feature allows the flight direction to be reversed for quick and easy clean-out, saving time when moving from one commodity to the next. The reverser kit is also available on its own, without the speed reducer.

Hopper Options

A hydraulic or remote Power Swing is available for the X10 and X13. The GULP2 drive over hopper is available for the X13. Also available for the X13 is the X-Tend, a retracting swing auger.

Hydraulic Hopper Winch

The hydraulic hopper winch allows the user to raise and lower the auger with ease.

Working Light Kits

When the sun goes down, LED working lights provide enhanced lighting conditions at the hopper, axle, and tube discharge to bin.

Specs

MODEL X10 - 83
TUBING GAUGE 12 GA
TUBE CONNECTORS Heavy-duty ³/16" Angle Flange
MAIN FLIGHTING 9" OD x 7 GA Stretched + Welded with Wear Edge TechnologyTM at Critical Points
WEAR EDGE TECHNOLOGYTM (REINFORCED FLIGHT) Hopper, Boot + Inclined Tube feature 10 GA Ribbon Weld, Wear Edge TechnologyTM
FLIGHTING SHAFT High Strength 2" OD x 11 GA Tubing
UPPER BEARING 1 ¼" Pillow Block Greaseable Ball Bearing
LOWER BEARING 1 ½" Pillow Block Greaseable Ball Bearing
TUBE TRUSSING ³/8" Aircraft Type Galvanized Steel Cable
HYDRAULIC LIFT 4" Single Acting Cylinder
UNDERCARRIAGE 4" x 8" Scissor Lift
AXLE 3" x 6" Tubing
HUB 6-Bolt Agricultural Type
TIRES 16" TRF
PTO SHAFT 35E Constant Velocity with One Shear Bolt
PARKING JACK 2000 LB side wind
SPROCKET + CHAIN #60
LOW PROFILE HOPPER HEIGHT 10.5"
PSI REQUIRED TO RAISE AUGER 1600 PSI
HP REQUIRED (WITH DRY WHEAT) 75 HP
WHEEL TREAD 132" - 180"
TRANSPORT HEIGHT 13' 4"