Cutting Width
10’ 4”
Cutting Height
0.95” - 3.2”
Disc Speed
2,835 RPM
PTO Required
60 HP

Features
Cutterbar
Superior Crop Flow
The Case IH TD103 pull-type disc mower features a modular cutterbar design for superior crop flow that reduces streaking and ensures quick mowing.
Versatility and Convenience
- Quick change knives cut change time in half. Simply use the provided tool, no wrenches necessary.
- Crop deflector shields located behind each end of the cutterbar to direct cut crop into a wide swath inside the tire path
- Two end discs that co-rotate to provide a narrower swath
- Able to adjust swath from 60 in–95 in (1.5 m–2.4 m)
- Left cutterbar shield is hinged for easy service access
Unmatched Reliability
- Shock protection to minimize repair expense
- Discs protected from internal gear damage by the drive hub
- 3-year cutterbar warranty includes one full-year of base factory warranty, plus two additional full years and unlimited hours of extended factory disc cutterbar warranty
80-degree Constant Velocity Joint
- Overload protection is standard
- Primary PTO uses an 80-degree constant velocity joint at the tractor end to permit tight turns, reduce noise and extend service life
- Standard tractor tire bumpers protect PTO driveline and tractor tires
Adjustable From 2-10 Degrees
Tilt is adjustable from 2–10 degrees using a mechanical turnbuckle.
Easy Transport
Attaching and detaching the mower from the tractor is easily accomplished with a simple clevis hitch . The TD103 can be pulled by lighter-weight tractors , as weight is pulled versus carried on a 3-point hitch.
- Transport width is just 10 ft 10 in (3,300 mm) when end shields are folded
- Removable parking jack stand is stored on top of tongue assembly
- Hydraulic tongue swing cylinder powers the unit from transport to operating position
- Has a 12-in (305-mm)-minimum cutterbar ground clearance in transport position
- Hinged right-side cutterbar shield folds up for narrow transport
- Safety tow chain standard
- Low transport height eliminates the need for implement lights
Quick Specs
Cutting Width: 10 ft 4 in (3.16 m)
Number of Disks: 8
Number of Knives/Disk: 2
Input Speed: 540 rpm
Cutting Width: 10 ft 4 in (3.16 m)
Number of Disks: 8
Number of Knives/Disk: 2
Input Speed: 540 rpm
-
Bancroft Implement, Inc.
312 West Ramsey St.
Bancroft, IA 50517
515.885.2319
Get Directions -
Corwith Red Power
301 1st Street
Corwith, IA 50430
515.583.2364
Get Directions -
Estherville Red Power
2703 Murray Rd.
Estherville, IA 51334
712.362.3596
Get Directions -
McRoberts Red Power
3080 Hwy 14
Greene, IA 50636
641.823.4154
Get Directions -
Humboldt Red Power
2050 13th Street North
Humboldt, IA 50548
515.332.1702
Get Directions -
Mason City Red Power
10997 265th St
Mason City, IA 50401
641.424.2702
Get Directions -
Manson Red Power
221 Eighth Street
Manson, IA 50563
712.469.2145
Get Directions -
New Hampton Red Power
2205 240th Street
New Hampton, IA 50659
641.394.3178
Get Directions -
Spencer Red Power
3695 Hwy 71
Spencer, IA 51301
712.262.2933
Get Directions -
West Bend Red Power
101 - 130th St
West Bend, IA 50597
515.887.7781
Get Directions
Red Power Team © 2023 Site by R.A | EquipmentLocator.com