Westfield X13-94 » Red Power Team, Iowa
x
x

Westfield X13-94

Westfield X13-94 for sale at Red Power Team, Iowa

Double tap to zoom

Westfield X13-94 for sale at Red Power Team, Iowa

 

Features

Hopper + Hopper Lift Arm

The low profile hopper features left and right hand flighting to pull grain toward the center of the hopper so it flows efficiently up into the tapered boot – maximizing capacity and minimizing unload time. The 6" rubber extension along the edge of the hopper prevents grain from splashing. The hopper lift arm and hopper can be positioned on the left- or right-hand side of the auger, offering the convenience of unloading from either side.

OPTIONAL FEATURES

Right Angle Drive

When working in a small space, the right angle drive allows the auger to be positioned at a 90-degree angle from the truck.

Reducer-Reverser

Required for 1,000 RPM tractors to reduce the speed to 540 RPM required for an auger.

The reversing feature allows the flight direction to be reversed for quick and easy clean-out, saving time when moving from one commodity to the next. The reverser kit is also available on its own, without the speed reducer.

Hopper Options

A hydraulic or remote Power Swing is available for the X10 and X13. The GULP2 drive over hopper is available for the X13. Also available for the X13 is the X-Tend, a retracting swing auger.

Hydraulic Hopper Winch

The hydraulic hopper winch allows the user to raise and lower the auger with ease.

Working Light Kits

When the sun goes down, LED working lights provide enhanced lighting conditions at the hopper, axle, and tube discharge to bin.

Specs

MODEL X13-94
TUBING GAUGE 12 GA
TUBE CONNECTORS Heavy-duty ¼" Angle Flange
MAIN FLIGHTING 11 ¾" OD x ¼" Stretched + Welded Wear Edge TechnologyTM at Critical Transfer Points)
WEAR EDGE TECHNOLOGYTM (REINFORCED FLIGHT) Hopper, Boot + Incline Tube
FLIGHTING SHAFT High Strength 3" OD x 11 GA Tubing Square Flight Connection
UPPER BEARING 1 ¾" Pillow Block Greaseable Ball Bearing
LOWER BEARING 2" Pillow Block Greaseable Ball Bearing
TUBE TRUSSING 2 ½" Steel Tube
HYDRAULIC LIFT Two 4 ½" Single Acting Cylinders
UNDERCARRIAGE 4" x 8" Scissor Lift
AXLE 3" x 6" Tubing
HUB 6-Bolt Agricultural Type
TIRES 16" TRF
PTO SHAFT 55E Constant Velocity with 2-Bolt Shear
PARKING JACK 5000 LB Side Wind
SPROCKET + CHAIN Hardened Tooth Sprocket with HD #80 Chain
LOW PROFILE HOPPER HEIGHT 60" Length x 48" Width x 10 ½" Height with Flat Free Tires
PSI REQUIRED TO RAISE AUGER 2050 PSI
HP REQUIRED (WITH DRY WHEAT) 145 - 165 HP
WHEEL TREAD 146"-182"
TRANSPORT HEIGHT 13' 4"