x
x

Salford Group 30' TOOLBAR SINGLE MOUNTED TANK

Salford Group 30' TOOLBAR SINGLE MOUNTED TANK for sale at Red Power Team, Iowa

Double tap to zoom

Salford Group 30' TOOLBAR SINGLE MOUNTED TANK for sale at Red Power Team, Iowa

 

Features

  • APPROX. MINIMUM HORSEPOWER REQUIRED IS 200 TO 240 HP - DEPENDING ON CONFIGURATION
  • REQUIRES MINIMUM OF 3 HYDRAULIC CIRCUITS
  • FAN REQUIRES 21 GPM @ 2800 PSI ON CLOSED CENTER HYDRAULICS
  • BUSHEL CAPACITY OF TANK IS CALCULATED BY VOLUME; ACTUAL CAPACITY MAY VARY BY COMMODITY TYPE

Specifications

30' TOOLBAR STANDARD FEATURES -  SINGLE MOUNTED TANK

  • REAR TOOLBAR:
    • 500 SERIES DOUBLE DISC OPENERS ON 7 1/2" SPACING
    • 48 OPENERS TOTAL
  • AXLES:
    • MAINFRAME - 19.0/45-17 TIRES / 8-BOLT HUBS / WALKING TANDEMS & CASTERS
    • WINGS - 31.5 x 13.5L x 15 TIRES ON 6-BOLT HUBS / WALKING TANDEMS & CASTERS
    • AIR SYSTEM FOR REAR TOOLBAR:
  • AIR SYSTEM FOR REAR TOOLBAR:
    • 6-TOWERS WITH 8-OUTLETS
    • 2 1/2" PRIMARY LINES TO TOWERS / 1" SECONDARY LINES TO ROW UNITS
    • POLYURETHANE PRIMARY LINES
  • UNITS SHIPPED AS FULL KNOCKDOWN OR PARTIAL ASSY AS TRUCKING WIDTH PERMITS
    • APPROX. WEIGHT WITH MOUNTED TANK - 21,300 LBS
    • TRANSPORT WIDTH - 14'11"
    • TRANSPORT HEIGHT - 13'10"

AVAILABLE 30' FRONT TOOLBAR OPTIONS -  SINGLE MOUNTED TANK

  • OPTION 1 - NO FRONT TOOLBAR ATTACHMENTS
  • OPTION 2 - 7 1/2 " - SPACING NO-TILL COULTERS (48 COULTERS)

AVAILABLE MOUNTED TANK CONFIGURATIONS -  SINGLE MOUNTED TANK

  • OPTION 1- SINGLE MOUNTED TANK / 6-OUTLET / GROUND DRIVE METER / 180 OR 140 BU
    • FAN: 17" S3 FAN W/ 16 CC MOTOR (SEE HYDRAULIC REQUIREMENTS
    • METER DRIVES: ZEROMAX INFINITELY ADJUSTABLE GROUND DRIVE

    • METER ROLLERS: 1/2" PLASTIC PEGGED ROLLERS

    • METERBOXES: 6-OUTLET STAINLESS STEEL FOR 2 1/2" LINES

    • TANKS: POLYMER TANK WITH STAINLESS STEEL INNER COMPONENTS

    • HOSE: 2 1/2" STAINLESS STEEL RIGID AND POLYURETHANE FLEX HOSE

    • AXLE: 28L x 26 DIAMOND TREAD TIRES ON 10-BOLT HUBS

    • ELECTRONICS:  DICKEY-JOHN INTELLI-AG IOSbus* CONTROL SYSTEM

    • Includes: Fan Speed Sensor, Meter Shaft Encoder, Bin Level Sensor, Bin Pressure Sensor, On-board ECU, Single Blocakge Sensor per Tower, Required ISObus* Harness to Tractor (Virtual terminal not included)
  • OPTION 2 -  SINGLE MOUNTED TANK / 6-OUTLET / HYD VARIABLE RATE / 180 OR 140 BU
    • FAN: 17" S3 FAN W/ 16 CC MOTOR (SEE HYDRAULIC REQUIREMENTS
    • METER DRIVES: DICKEY-JOHN HYDRA-DRIVE HYD VARIABLE RATE

    • METER ROLLERS: 1/2" PLASTIC PEGGED ROLLERS

    • METERBOXES: 6-OUTLET STAINLESS STEEL FOR 2 1/2" LINES

    • TANKS: POLYMER TANK WITH STAINLESS STEEL INNER COMPONENTS

    • HOSE: 2 1/2" STAINLESS STEEL RIGID AND POLYURETHANE FLEX HOSE

    • AXLE: 28L x 26 DIAMOND TREAD TIRES ON 10-BOLT HUBS

    • ELECTRONICS:  DICKEY-JOHN INTELLI-AG IOSbus* CONTROL SYSTEM

    • Includes: Fan Speed Sensor, Meter Shaft Encoder, Bin Level Sensor, Bin Pressure Sensor, On-board ECU, Single Blocakge Sensor per Tower, Required ISObus* Harness to Tractor (Virtual terminal not included)

 

OTHER OPTIONS -  SINGLE MOUNTED TANK

  • DIGI-STAR SCALE KIT WITH CAB READOUT
  • DIGI-STAR SCALE-LINK ISObus SCALE KIT (SEE ABOVE NOTE ON ISObus)
  • TOW-BEHIND CART HITCH (INCLUDES ONE PAIR OF HYD LINES)
  • PIONEER COUPLER KIT (1/2" REAR REMOTE LINES)
  • DEDUCT ELECTRONIC CONTROLS

Join our email list and you could receive a hat!

Red Power Team © 2020 Site by R.A | EquipmentLocator.com