Salford Group 30' TOOLBAR DOUBLE MOUNTED TANK » Red Power Team, Iowa
x
x

Salford Group 30' TOOLBAR DOUBLE MOUNTED TANK

Salford Group 30' TOOLBAR DOUBLE MOUNTED TANK for sale at Red Power Team, Iowa

Double tap to zoom

Salford Group 30' TOOLBAR DOUBLE MOUNTED TANK for sale at Red Power Team, Iowa

 

Features

  • APPROX. MINIMUM HORSEPOWER REQUIRED IS 230 TO 300 HP - DEPENDING ON CONFIGURATION
  • REQUIRES MINIMUM OF 3 HYDRAULIC CIRCUITS
  •  FAN REQUIRES 21 GPM @ 2800 PSI ON CLOSED CENTER HYDRAULICS
  • BUSHEL CAPACITY OF TANK IS CALCULATED BY VOLUME; ACTUAL CAPACITY MAY VARY BY COMMODITY TYPE

Specifications

30' TOOLBAR STANDARD FEATURES - DOUBLE MOUNTED TANK

  • REAR TOOLBAR:
    • 500 SERIES DOUBLE DISC OPENERS ON 7 1/2" SPACING
    • 48 OPENERS TOTAL
  • AXLES:
    • MAINFRAME - 19.0/45-17 TIRES / 8-BOLT HUBS / WALKING TANDEMS & CASTERS
    • WINGS - 31.5 x 13.5L x 15 TIRES ON 6-BOLT HUBS / WALKING TANDEMS & CASTERS
    • AIR SYSTEM FOR REAR TOOLBAR:
  • AIR SYSTEM FOR REAR TOOLBAR:
    • 6-TOWERS WITH 8-OUTLETS
    • 2 1/2" PRIMARY LINES TO TOWERS / 1" SECONDARY LINES TO ROW UNITS
    • POLYURETHANE PRIMARY LINES
  • UNITS SHIPPED AS FULL KNOCK DOWN OR PARTIAL ASSY AS TRUCKING WIDTH PERMITS
    • APPROX. WEIGHT WITH MOUNTED TANK - 21,300 LBS
    • TRANSPORT WIDTH - 14'11"
    • TRANSPORT HEIGHT - 13'10"

AVAILABLE 30' FRONT TOOLBAR OPTIONS - DOUBLE MOUNTED TANK

OPTION 1 - NO FRONT TOOLBAR ATTACHMENTS

OPTION 2 - 7.5" SP. NO-TILL COULTERS (48 COULTERS)

OPTION 3 - 15" SP. (MID-ROW) NO-TILL COULTER W/ FERTILIZER BOOT ATTACHMENT (includes 6 tower air system with 1 1/4" lines to row units, 2 1/2" polyurethane primary lines)

OPTION 4 - 15" SP. (MID-ROW) 500 SERIES OPENERS FOR FERTLIZER (includes 6 tower air system with 1 1/4" lines to row units, 2 1/2" polyurethane primary lines)

AVAILABLE MOUNTED TANK CONFIGURATIONS - - DOUBLE MOUNTED TANK

  • OPTION 1 - DOUBLE MOUNTED TANK / 6-OUTLET / GRD DRIVEN METERING / 320 or 280 BU
    • FAN: 17" S3 FAN W/ 16 CC MOTOR (SEE HYDRAULIC REQUIREMENTS)
    • METER DRIVES: ZEROMAX INFINITELY ADJUSTABLE GROUND DRIVE

    • METER ROLLERS: 1/2" PLASTIC PEGGED ROLLERS

    • METERBOXES: 6-OUTLET STAINLESS STEEL FOR 2 1/2" LINES

    • TANKS: POLYMER TANK WITH STAINLESS STEEL INNER COMPONENTS

    • HOSE: 2 1/2" STAINLESS STEEL RIGID AND POLYURETHANE FLEX HOSE

    • AXLE: 28L x 26 DIAMOND TREAD TIRES ON 10-BOLT HUBS

    • ELECTRONICS:  DICKEY-JOHN INTELLI-AG IOSbus* CONTROL SYSTEM

    • Includes: Fan Speed Sensor, Meter Shaft Encoders, Bin Level Sensors, Bin Pressure Sensors, On-board ECU, Single Blocakge Sensor per Tower Required ISObus* Harness to Tractor (Virtual terminal not included)

  • OPTION 2 - DOUBLE MOUNTED TANK / 6-OUTLET / HYD VARIABLE RATE / 320 OR 280 BU
    • FAN: 17" S3 FAN W/ 16 CC MOTOR (SEE HYDRAULIC REQUIREMENTS)
    • METER DRIVES: DICKEY-JOHN HYDRA-DRIVE HYD VARIABLE RATE

    • METER ROLLERS: 1/2" PLASTIC PEGGED ROLLERS

    • METERBOXES: 6-OUTLET STAINLESS STEEL FOR 2 1/2" LINES

    • TANKS: POLYMER TANK WITH STAINLESS STEEL INNER COMPONENTS

    • HOSE: 2 1/2" STAINLESS STEEL RIGID AND POLYURETHANE FLEX HOSE

    • AXLE: 28L x 26 DIAMOND TREAD TIRES ON 10-BOLT HUBS

    • ELECTRONICS:  DICKEY-JOHN INTELLI-AG IOSbus* CONTROL SYSTEM

    • Includes: Fan Speed Sensor, Meter Shaft Encoders, Bin Level Sensors, Bin Pressure Sensors, On-board ECU, Single Blocakge Sensor per Tower Required ISObus* Harness to Tractor (Virtual terminal not included)

OTHER OPTIONS - DOUBLE MOUNTED TANK

  • DOUBLE SHOOT (ON REAR TANK ONLY)
  • DIGI-STAR SCALE KIT WITH CAB READOUT
  • DIGI-STAR SCALE-LINK ISObus SCALE KIT (SEE ABOVE NOTE ON ISObus)
  • TOW-BEHIND CART HITCH (INCLUDES ONE PAIR OF HYD LINES)
  • PIONEER COUPLER KIT (1/2" REAR REMOTE LINES)
  • DEDUCT ELECTRONIC CONTROLS