Salford Group VALMAR 1665 AIR SEEDER-MOUNT

Get all the benefits from in-furrow applied granular inoculant 
Inoculant Applicator
Injects inoculant into air seeder towers for precise placement in seed furrows.
Modified hopper shaft provides agitation to reduce bridging in the hopper.
Comes with eight tower injectors.
Injectors do not affect tower performance for seed or fertilizer.
Individually metered outlets allow matching the numbers of air seed towers.

1665 Individual Metering Applicators

Individual Outlet Positive Displacement Applicator
Apply insecticides, herbicides, small seeds, inoculants, or micro-nutrients precisely where needed and at the rate required. Valmar’s ground drive metering assures precise application regardless of varying ground speed. The roller chain is driven, 60-speed mechanical gearbox delivers an accurate application in five percent increments, or you can use the optional hydraulic drive for V.R.T. application. With Valmar’s individual metering, matching the number of outlets required for your operation is easily accomplished by opening or closing individual slide gates.

Hopper:

• 33 cu. ft.
• Mild steel with two-component epoxy primer and two-component, cross-linked acrylic top coat paint system
• Weather tight lid
• Product-level sight gauge
• Agitator to reduce product bridging
• Manifold pressure gauge

Product Delivery:

• 1.25-inch ID flexible PVC hose
• 8 air seeder tower injectors

Metering:

• Stainless steel metering bottom
• 16 individual metering outlets can be shut off independently to match the number of air seeder towers
• Optional Valmar ground drive, hydraulic drive, or utilize some components of air seeder drive