Features
Two-Stage Cutting Chamber
Material that enters the spinning rotor is forced through moving teeth and a new, adjustable primary shear bar, the clearance of which can be narrowed or widened depending upon the desired material size and production rate. This partially reduced material then passes smoothly to the secondary cutting chamber behind the front bumper, where it's processed further before being discharged toward the ground.
Synchronous Belt Drive
The positive drive, cog belt and sprocket design increase efficiency and require less maintenance than other drive types.
Adjustable Skid Shoes
Skid shoes on the G4 now adjust from 0.5 inches to minus 1.5 inches to allow for mulching below grade.
Machined Anti-Wrap Bearing Protector
The rotor ends are machine turned to mate with close tolerance, machined anti-wrap rings, resulting in minimal debris in the bearing chamber.
Adjustable Push Bar
Complete with welded claw hooks, this bar can push falling brush and trees away from the power unit, or pull them into position for proper feeding into the head.
New Staggered/Spiral Tooth Pattern
An improved staggered/spiral tooth pattern assures single-tooth contact with the work surface at all times, as well as optimal balance on the rotor.
Premium Strength Steel Housing
Body components are laser cut from premium strength steel to assure the utmost in rugged reliability. Abrasion resistant steel is used in high-wear areas.
Industrial Rotor Components
Spinning at 2,000-2,400 RPM, the G4's rotor is 17-inches in diameter with 2 3/16-inch bearings, and features robotically welded, forged steel knife holders.
Safety Elements
To keep flying debris at a minimum, steel deflector chains run the entire length of the attachment. A built-in hydraulic braking system quickly brings the rotor to a stop at shutdown.
Performance Monitoring
An on-board PSI gauge monitors the load on the hydraulic system, which enables the operator to get peak performance out of the G4 attachment.
Universal Skid Steer Mount
The G4 can attach to any skid steer thanks to a universal mount.
Increased Visibility
A lower profile improves visibility for the operator, thus increasing safety, productivity and efficiency.
Custom Hydraulic Control Valve
Incorporates a system high-pressure relief valve to protect from pressure spikes at the source. Also includes an anti-cavitation shutdown circuit.
Hydraulic Hose Routing
Improved on the G4 with shorter hoses that reduce the chance of binding, yet allow for full range of motion without damage. Hoses are included (no couplers).
Specs
Model | 61G4 |
Cutting Width | 61" (1.55 m) |
Overall Width | 76.2" (1.94 m) |
Number of Teeth | 36 |
Weight with Variable-Displacement Piston Motor (Parker) |
2,453 LBS (1,112.6 kg) |
Crated Weight | 2,700 LBS (1,224.7 kg) |
Auxiliary Hydraulic Flow (Up To 6,000 PSI) | 33-37 GPM, 38-42 GPM, or 43-45 GPM |
Hydraulic Horsepower Range | 50-120 Hydraulic HP |
Specifications and data are subject to change without notice. |
-
Bancroft Implement, Inc.
312 West Ramsey St.
Bancroft, IA 50517
515.885.2319
Get Directions -
Corwith Red Power
301 1st Street
Corwith, IA 50430
515.583.2364
Get Directions -
Estherville Red Power
2703 Murray Rd.
Estherville, IA 51334
712.362.3596
Get Directions -
McRoberts Red Power
3080 Hwy 14
Greene, IA 50636
641.823.4154
Get Directions -
Humboldt Red Power
2050 13th Street North
Humboldt, IA 50548
515.332.1702
Get Directions -
Mason City Red Power
10997 265th St
Mason City, IA 50401
641.424.2702
Get Directions -
Manson Red Power
221 Eighth Street
Manson, IA 50563
712.469.2145
Get Directions -
New Hampton Red Power
2205 240th Street
New Hampton, IA 50659
641.394.3178
Get Directions -
Spencer Red Power
3695 Hwy 71
Spencer, IA 51301
712.262.2933
Get Directions -
West Bend Red Power
101 - 130th St
West Bend, IA 50597
515.887.7781
Get Directions
Red Power Team © 2024 Site by R.A | EquipmentLocator.com