Loftness 51BX40 » Red Power Team, Iowa
x
x
Loftness 51BX40 for sale at Red Power Team, Iowa

Double tap to zoom

Loftness 51BX40 for sale at Red Power Team, Iowa

 

Features

DEPTH GAUGES

The 17-inch-diameter Battle Ax rotor includes built-in depth gauges, which function similarly to raker teeth on chain saws to prevent the attachment from engaging too much material at one time. This unique design is more ideal for managing the amount of material being fed into the attachment than competitive ring-style rotors, which many operators find to be overly limiting, especially when using carbide cutting teeth.

TWO-STAGE CUTTING CHAMBER

The Battle Ax features the Loftness-exclusive two-stage cutting chamber design, which is capable of processing material more thoroughly than competitive units by cutting material twice. Not only does this allow faster decomposition, but it also results in a nicer looking end product. Material is first cut at the primary shear bar, which is adjustable, so the clearance can be narrowed or widened depending upon the desired material size and production rate. From here, the partially reduced material passes smoothly to the secondary cutting chamber behind the front bumper, where it’s processed further before being discharged toward the ground.

ADJUSTABLE-DISPLACEMENT PISTON MOTOR

The 40 Series Battle Ax features a 135cc adjustable displacement piston motor for excavators with hydraulic systems ranging from 25 to 75 gallons per minute and up to 6,000 PSI (80 to 210 hydraulic horsepower). This motor turns the rotor from 1,700 to 2,200 RPM and can be manually adjusted for fine-tuning performance on a variety of excavators.

SYNCHRONOUS BELT DRIVE

The positive drive, cog belt and sprocket design increases efficiency and requires less maintenance than other drive types.

STAGGERED/SPIRAL TOOTH PATTERN

A staggered tooth arrangement ensures single-tooth contact with the work surface at all times while maintaining optimal rotor balance.

TOOTH MOUNTING

The cutting teeth are mounted to the rotor with a single bolt. They can be easily reversed or replaced on the jobsite using a common hex socket.

ANTI-WRAP BEARING PROTECTION

The rotor ends mate with close tolerance machined anti-wrap rings, resulting in minimal debris in the bearing chamber.

PREMIUM STRENGTH STEEL HOUSING

The Battle Ax is constructed of high-strength steel to withstand some of the toughest operating conditions.

Specs

Model51BX40
Cutting Width 51" (1.3 m)
Recommended Excavator Weight Range (in Pounds) 36K-60K
Overall Width 80.6" (2 m)
Number of Teeth 26
Weight (without mount) 3,010 LBS (1,365.3 kg)
Crated Weight in Pounds 3,120 LBS (1,415.2 kg)
Hydraulic Horsepower Range 80-210 Hydraulic HP

Specifications and data are subject to change without notice.