HayBuster H-1000 Series II » Red Power Team, Iowa
x
x

HayBuster H-1000 Series II

HayBuster H-1000 Series II for sale at Red Power Team, Iowa

Double tap to zoom

HayBuster H-1000 Series II for sale at Red Power Team, Iowa

 

Features

18" BY 20" LONG HYDRAULIC FOLDING CONVEYOR
The Model H-1000 Tub grinder is now equipped with a hydraulic folding conveyor. The 20’ long x 18” wide conveyor allows you to stack ground material up to 13’ 9” high at a 40-degree angle.

BIG BITE HAMMERMILL
The hammermill is constructed of 3/16” thick x 15 ¾” diameter plates with 15/16” case hardened rods that hold 64-3/8” hammers. These hammers have 4 hardened edges that can be rotated and flipped to get many hours of grinding.

EIGHT BELT DRIVE SYSTEM
The 8 multiple belt drive system is dependable. It supplies the power from the PTO of the tractor to the hammermill. This drive system turns the mill at approximately 2 x PTO speed. This mill speed provides for smooth feeding and delivers high capacity grinding performance.

HIGH-CAPACITY GRAIN GRINDING
High-capacity grain grinding is another important operation that the H-1000 can also accomplish. By placing the optional grain-grinding hopper over the hammermill opening and changing screens, the H-1000 becomes a high capacity grain grinder for grinding and/or cracking feed grains.

TUB DRIVE
The H-1000 tub is driven by hydraulic motor which drives a heavy-duty roller chain. The sprocket on the tub is a continuous sprocket that provides a responsive and smooth transmission of power to the tub.

ELECTRONIC GOVERNOR
The tub rotation is controlled by an electronic governor that stabilizes engine load by adjusting the tub speed. It also controls tub direction, clockwise, stop and counter-clockwise.

DUAL HIGH-CAPACITY AUGERS
The dual 9” high-capacity augers mounted in the belly pan, discharges the ground product to the stacking conveyor. The belly pan provides a clean area to catch & discharge small product such as ground corn & barley.

CONVEYOR DRIVEN BY POSITIVE MECHANICAL DRIVE
The Hydraulic folding stacking conveyor is powered by a positive mechanical drive system.

HEAVY-DUTY HIGH-CAPACITY TUB
The H-1000 Tub is constructed of a 10-gauge steel floor and a 14-gauge steel side wall. The width of the tub is 10’ 3” at the flare, 8’ at the base and 44 ½” deep. The H-1000 tub has the capacity to handle the largest round and square bales as well as loose hay.

Specs

WEIGHT
Total 6,830 lbs. (3,098 kg)
   
TRANSPORT DIMENSIONS
Width 10 ft. 3 in. (3.12 m)
Height 10 ft. 2 in. (3.10 m)
Length 20 ft. (6.10 m)
   
CHASSIS FEATURES
Towing Arrangement Clevis hitch
Bearings Tapered roller
   
TUB FEATURES
Loading Height 8 ft. (2.44 m)
Tub Width at Flare 10 ft. (3.05 m)
Depth 44-1/2 in. (1.13 m)
Tub Inside dia at Base 8 ft. (2.44 m)
Tub Wall Thickness 12 gauge (2.66 mm)
Tub Floor Thickness 10 gauge (3.42 mm)
Drive Mechanism Full Sprocket around tub Electro/Hydraulic
Speed Control Electronic Governor
   
HAMMERMILL
Length 44-1/2 in. (1.13 m)
Diameter, Hammers Extended 26 in. (66 cm)
Feed Opening 27 in. x 45 in. (68.58 cm x 114.3 cm)
Hammers 3/8 in. (9.53 mm) Thick, A.B. Hardened Swing
Number of Hammers 64
Hammer Rods 15/16 in. (23.81 mm) dia., Case Hardened
Cylinder Plates 3/16 in. thick x 15-¾ in. dia.
Cylinder Shaft 3 in. (7.62 cm), Stress Proof Steel
Drive End Bearing 2-3/4 in.(6.99 cm), Pillow Block
Idle End Bearing 2-7/16 in. (6.19 cm), Pillow Block
Screens 1/8 in. (3.18 mm), 3/16 in. (4.76 mm), or 1/4 in. (6.35 mm) thick and various hole sizes from 1/8 in. (3.18 mm) to 4 in. (101.6 cm)
Screen Area 2,400 sq. in. (15,483 sq. cm)
Drive PTO through multiple V Belts
   
BELLY CONVEYOR
Type Double Free Floating Augers
Auger Size 9 in. (22.86 cm) x 96 in. (2.44 m)
Width 33-¾ in. (85.73 cm)
Drive Mechanical
   
DISCHARGE CONVEYOR
Type Rubber Belt with Cleats
Drive Mechanical
Drive & Idler Roller Type "Easy Clean"
Length 20 ft. (6.1 m)
Width 18 in. (45.72 cm)
Maximum Conveyor Lift Height 13 ft. 9 in. (4.19 m)
Conveyor Lift Hydraulic
Conveyor Lift Cylinder 3" x 12" (7.62 cm x 30.48 cm)
Conveyor Fold Hydraulic Folding Over Rear of Tub
   
OPERATOR CONTROLS
Tub Rotation 3 Position Hydraulic Valve for Clockwise, Stop, & Counter-Clockwise
Tub Speed DuraTech Model RCB93 Electronic Governor Stabilizes Engine Load by Controlling Tub Rotation Speed
Conveyor Lift 3-Position Hydraulic Valve for Raise, Hold, & Lower
   
REQUIREMENTS FOR OPERATION TRACTOR
PTO Horsepower Required 80 HP (59.7 kw) to 175 HP (130.5 kw)
Min. Tractor Hydraulic Output 8 gpm at 1500 psi (30.3 lpm x 10,345 kPa)
Hydraulic Remote Controls (1) Double-acting control valve with quick coupler outlets
Electrical 12 VDC
   
GRINDER
Hydraulic Reservoir 12 gallon (45.4 liter) capacity
Oil Requirement Mobil 423, Co-op Super HTB or Equivalent
SMV Sign Standard equipment
Road Lights Standard equipment