HayBuster 2800 Balebuster » Red Power Team, Iowa
x
x

HayBuster 2800 Balebuster

HayBuster 2800 Balebuster for sale at Red Power Team, Iowa

Double tap to zoom

HayBuster 2800 Balebuster for sale at Red Power Team, Iowa

 

Features

HEAVY DUTY FIXED SHREDDER CHAMBER WITH 3 CHAIN SLAT CONVEYOR

Combining these features with the heavy duty flails and high speed rotor, the 2800 Heavy Duty Fixed Shredder Chamber will process bales in any condition... wet, frozen, old, new, or with flat bottoms.  The conveyor is slanted so it helps feed the hay/straw into the rotor.

OIL BATH CHAIN CASE AND HIGH SPEED ROTOR

The 2800 features an oil bath chain case with double 60-roller chain that reverses the direction of the P.T.O. and increases the speed and efficiency of the rotor.  The Heavy Duty 9' x 26" Rotor with 40 . 3 lb.   flails processes both dry hay and silage bales.

ROTOR ACCESS DOOR

The 2800 is equipped with rotor access doors, giving you quick and easy access to the rotor for routine inspections and twine removal.

HYDRAULICALLY ADJUSTABLE SLUG BARS

The hydraulically adjustable slugbar allows the operator to adjust the length of the cut, even with a bale in the chamber.

9'  BALE CHAMBER

The 2800 is equipped with a 9' bale chamber for processing all round and square bales.

DUAL ACTION LOADING ARMS

The 2800 is equipped with Dual Action Loading Arms to allow for loading square and round bales into the bale chamber with equal ease.

HEAVY DUTY FRAME

The 2800 has a heavy duty frame for strength and durability

RIGHT HAND DISCHARGE

Tractor hydraulic controls are located on the right side, and the 2800's right hand discharge makes it easy to look over your right shoulder while keeping your hands on the controls.

TWO STAGE HYDRAULIC DEFLECTOR

The Two Stage Hydraulic Deflector allows the operator to set the deflector position directly from the tractor cab.  Additionally, the position of each half of the deflector may be independently set for greater control over discharge dispersal.

Specs

MODEL 2800 Balebuster
WEIGHT  -
 Total 7,300 lbs. (3,311 kg)
 Tongue Weight (Bale loader fully raised) 2,550 lbs. (1,156 kg)
 Tongue Weight (Bale loader down) 2,150 lbs. (975 kg)
   
TRANSPORT DIMENSIONS (Bale loader fully raised, deflector folded)  -
 Width 8'-5", 101 in. (2.57 m)
 Length 17'-7", 211 in. (5.36 m)
 Height 8'-6", 102 in. (2.59 m)
   
WORKING DIMENSIONS (With 1 bale, deflector in spread position)  -
 Width 10'-10", 130 in. (3.30 m)
 Length 24'-2", 290 in. (7.37 m)
 Height 10', 120 in. (2.59 m)
   
WORKING DIMENSIONS (With 2 bales, deflector in spread position)  -
 Width 10'-10", 130 in. (3.30 m)
 Length 27'-5", 329 in. (8.36 m)
 Height 10', 120 in. (2.59 m)
   
CHASSIS FEATURES  -
 Towing Arrangement Clevis type hitch
 Jack Capacity 7,000 lbs. (3,175 kg)
 Jack Travel 10 in. (25.4 cm)
 Tires (2) 16.5 x 16.1 - 10 ply
 Wheels (2) 16.1 x 12 - 8 bolt, drop center
 Bearing Type Tapered Roller
   
BALE LOADER  -
 Type Hydraulic twin boom arms, squeeze arms for square bales
 Bale Tines Tubular Steel, 10 degree float, 4-position adjustment for round bales
   
BALE CONVEYOR  -
 Type 4 roller chains with bolt-on cross slat
 Drive Hydraulic Orbital Motor with Adjustable Flow Control
   
CHAIN CASE  -
 Sealed oil lube chain case reverses rotation and increases rotor speed; double 60-roller chain  
   
BALE SHREDDER CHAMBER  -
 Max. Bale Size Round: 6 ft. long x 6.5 ft. dia. (1.83 m x 1.98m)
   Square: 52" x 52" x 8 ft. (1.32 m x 1.32 m x 2.4 m)
 Max. Bale Weight Each 2,200 lbs. (1,000 kg)
 Shredder Chamber Length 120 in. (3.04 m)
 Shredder Chamber Width 91 in. (2.31 m)
 Rotor Diameter 26 in. (66 cm) Flails extended
 Rotor Bearing Ball, 2 in. (5.08 cm)
 Number of Flails 40
 Flail type Heavy duty, 7/16 in. (11.11 mm) thick, 3 lbs. (1.36 kg), Heat treated spring steel, swinging
 Number of Stripper Plates Not available at this time
 Deflector Split, Hydraulic with infinite settings through a 120° range
 Max. Horizontal Spread Straw up to 50 ft. (15.24 m)
   
OPERATOR CONTROLS  -
 Loader, Conveyor, Defector, Squeeze loader, and Slug Bar  
 -1 Hydraulic Remote with Electric over Hydraulic Finger Tip Controls  
 Bale Conveyor Speed - Conveyor speed control valve  
 Slug bar - Hydraulic adjustment with infinite adjustment  
 Deflector Position Setting - Hydraulic with split deflector  
   
REQUIREMENTS FOR OPERATION  -
 PTO Horsepower Required 90 hp (67.1 kw) minimum
 PTO Type 1000 RPM, 1-3/8 in. (3.49 cm) diameter shaft with 21 splines.
 Min. Tractor Hydraulic Output 8 gpm at 1500 psi (30.3 lpm X 10,345 kPa)
 Hydraulic Remote Controls (1) Double-Acting Control Valve with Quick Coupler Outlets
 Tractor Weight Must be of equal or greater weight than that of a 2800 APB with 2 bales
 SMV Sign Standard equipment
 Road Lights Standard equipment