H&S Model HPH4255 » Red Power Team, Iowa
x
x

H&S Model HPH4255

H&S Model HPH4255 for sale at Red Power Team, Iowa

Double tap to zoom

H&S Model HPH4255 for sale at Red Power Team, Iowa

 

Features

  • Horizontal beaters.
  • All Hydraulic Push models use solid virgin grade poly with UV inhibitor, for the floor and sides allowing less friction.
  • The hydraulic endgate has 2 cylinders with ⅜″ hose and pipe for faster operation in cold weather.
  • A top beater is standard equipment.
  • Heavy duty rectangular tubing is used for the pole to ensure strength and long life. Structural channel floor supports spaced 9 ½″ apart are used for maximum floor support.
  • The HP’s PTO beater drive system is driven by the unique center drive system that consists of a straight shaft off the PTO underneath the manure spreader to an angle gearbox in the rear, and over to the beater drive sprocket.
  • #80 chains are used for strength and long life and easy open shields makes lubrication easy.
  • The Hydraulic Push-Off System on all models features two hydraulic cylinders that sequence to reduce push-off forces for fast unloading of material.
  • Beater blades are replaceable and the beater assembly is removable for stockpiling manure.
  • Removal of the beater assembly is done by simply removing the mounting bolts and a drive chain.

Specs

HPH4255
CAPACITY – OLD RATING 550 Bushel
CAPACITY CU. FT, STRUCK LEVEL 430
SIDE LOADING HEIGHT 81″
2ND OR VERTICAL BEATER HEIGHT 86 ¾″
HEIGHT-TOP OF HYD. END GATE (W/O HOOK) 85 ½″
HEIGHT-TOP OF SCREEN (VERT. BEATER ONLY) N/A
INSIDE WIDTH 72″
INSIDE LENGTH 16′
INSIDE DEPTH 53″
OVERALL WIDTH W/TIRES 10′ 2″
OVERALL LENGTH 26′ 5″
STANDARD NUMBER OF BEATERS 2
HORIZONTAL BEATER DIAMETER/LOWER 29″
HORIZONTAL BEATER DIAMETER/UPPER 29″
VERTICAL BEATER DIAMETER N/A
REPLACEABLE BEATER PADDLES YES
REMOVEABLE BEATER ASSEMBLY YES
HYDRAULIC PUSH CYLINDER DIAMETER 4 ½″
HYDRAULIC PUSH CYLINDER HOSE DIAMETER ½″
HUB 10 Bolt
SPINDLE SIZE 3″
TIRE SIZE – STANDARD 425 x 22.5
TIRE SIZE – OPTIONAL 600/50 x 22.5
HYDRAULIC END GATE Standard
CYLINDERS ON HYDRAULIC END GATE 2 W-⅜″ Hose
REAR PAN Optional
JACK Standard
WOOD SIDE RAILS Standard
WEIGHT W/TIRES 9,680#
PTO CHOICES
540 RPM PTO
w/ OVER RUNNING TORQUE LIMITING CLUTCH
N/A
1,000 PRM PTO
1¾ or 1¾ w/ SHEAR BOLT PROTECTION
YES
1,000 PRM PTO
1¾ or 1¾ w/ OVER RUNNING TORQUE LIMITING CLUTCH
YES