Farm King VT3000 8" » Red Power Team, Iowa

Farm King VT3000 8"

Farm King VT3000 8" for sale at Red Power Team, Iowa

Double tap to zoom

Farm King VT3000 8" for sale at Red Power Team, Iowa



Tandem Walking Beam Axle
Standard equipment on the main frame and wings, each walking beam pivots on greaseable bushings to improve weight distribution and stability when the implement is being transported and provides for uniform working depth by averaging out field variations.

Stone-flex Bearing Hangers
Gang style Vertical Tillage encourages each blade to cut / penetrate and continue rolling through tough residue where individually mounted blades / coulters will plug. Stone-flex bearing hangers are perfect for absorbing shock loads at the higher working speeds of the VT3000: they react to both vertical and horizontal forces. Blade penetration is not compromised.

Heavy-Duty Bearings
Heavy-duty, single row bearings are standard equipment on the VT3000. Each bearing features the latest in seal technology to keep contamination out of the bearings and provide years of trouble free operation.

T2-215 Trunnion Mounted Bearings
Exclusive to Farm King the T2-215 series bearings are trunnion mounted to provide positive alignment and handle gang shaft deflection that results from shock loads. Two 215 series ball bearings are positioned back-to-back within the over-sized regreaseable housing. Each 215 bearing uses eleven 11/16" (17 mm) steel ball bearings and each T2-215 bearing unit is rated at 22,800 lb radial load rating at 33-1/3 rpm. Housing design makes it simple to remove gangs by removing one bolt per bearing housing.

Standard hydraulic lockout valves prevent operation of either the lift or wing cylinders when the implement is being transported.

Finishing Attachments
12" diameter rolling baskets are available to assist with breaking apart clods and root wads and aids in the mixing of soil and residue as well as the firming and leveling of the soil surface. Also available is the 3-bar mounted tine harrows featuring an adjustable rake angle and spring-loaded carrier arms.


Model VT3000
Blade spacing 8" (203 mm)   
Model 3290 3320 3345 3375
Width, working 28' 10"
(8.8 m)
31' 7"
(9.6 m)
34' 2"
(10.4 m)
36' 11
(11.3 m)
Width, transport 17' 3" (5.3 m) 17' 3" (5.3 m) 17' 7" (5.4 m) 17' 7" (5.4 m)
Height, transport 13' 8" (4.2 m) 14' 6" (4.4 m) 14' 8" (4.5 m) 16' (4.9 m)
Weight class 800 lb/ft class (1190 kg/m)   
Horsepower required 8 to 12 engine HP/foot   
(20 to 30 kW per/m)
Working depth 0 to 5" (0 to 127 mm)   
Working speed 7 to 10 mph (11 to 16 km/hr)   
Frame, main frame 8" x 4" x 0.5" (203 x 102 x 12.7 mm)   
Frame, cross member 6" x 4" x 0.5" (152 x 102 x 12.7 mm)   
Bearings, standard HD, single row bearings   
Bearings, optional T2-215 series   
Gang angle, adjustable 0, 4, 8, 12, 16°   
Gang shaft 1-15/16" (49 mm) high carbon steel   
Gang shaft, factory torqued 3,200 ft-lb (4339 N·m)   
Blades, standard 20" x 1/4" (508 x 6.5 mm)   
Blades, optional 22" x 1/4" (560 x 6.5 mm)   
Tires, main frame FS24 380/55R16.5 radial tires   
Tires, wing frame 12.5L x 15 implement tires   
Depth control 3-cylinder series system c/w depth stop segments   
Hitch Auto-leveling, spring loaded, adjustable to level implement front-to-rear   
Rolling baskets 12" diameter w/8-spiral flat bars   
Tine harrows 3-bar mounted